現在位置:首頁>實驗耗材配件>細胞培養耗材> 培養皿
易必迪ibidi傷口愈合試驗 Wound Healing culture inserts
價 格:詢價
產 地:德國更新時間:2020-11-02 15:20
品 牌:ibidi型 號:81176
狀 態:正常點擊量:1672
上海非利加實業有限公司
聯 系 人: 上海非利加實業有限公司
電 話: 400-006-7520
傳 真: 400-006-7520
配送方式: 上海自提或三方快遞
聯系我時請說在上海非利加實業有限公司上看到的,謝謝!
產品特點:
ibidi 傷口愈合與遷移系列產品,是ibidi公司根據傷口愈合和細胞遷移實驗的要求設計的。它較之傳統的劃痕實驗,有以下優點,
***可以確定劃痕的寬度和面積,因此實驗可重復性好;
***可移除的插入元件(Culture-Insert)對玻片表面包被的幾乎沒有損傷,因此不影響后期gap處細胞的生長和遷移;
***配合ibidi加熱和孵育系統,可以進行清晰,長期的活細胞顯微拍攝;
產品參數
貨號:
Cat. No. | Description | Pcs./Box | |
---|---|---|---|
80206 | μ-Dish 35 mm, low Culture-Insert, ready to use in a μ-Dish 35 mm, low wall, ibiTreat, tissue culture treated, sterile | 30 | |
80201 | μ-Dish 35 mm, low Culture-Insert, ready to use in a μ-Dish 35 mm, low wall, hydrophobic, uncoated, sterile | 30 | |
81176 | μ-Dish 35 mm, high Culture-Insert, Culture-Inserts ready to use in a μ-Dish 35 mm, high wall, ibiTreat, tissue culture treated, sterile | 30 | |
81171 | μ-Dish 35 mm, high Culture-Insert, Culture-Inserts ready to use in a μ-Dish 35 mm, high wall, hydrophobic, uncoated, sterile | 30 | |
80241 | Culture-Insert 24, a 24 well plate with 24 ready to use Culture-Inserts, tissue culture treated, polystyrene, sterile | 3 | |
80209 | 25 Culture-Inserts for self-insertion, sterile, in a 10 cm transport dish | 25 |
注意:與培養皿配套的插件分離后不能二次使用,80209的插件可單個取出放入其他培養皿內使用
規格參數:
Number of wells | 2 |
Outer dimensions (w x l x h) in mm | 8.4 x 8.4 x 5 |
Volume per well | 70 μl |
Growth area per well | 0.22 cm2 |
Coating area per well | 0.82 cm2 |
Width of cell free gap | 500 μm +/- 50 μm |
Material | Biocompatible silicone |
Bottom | No bottom - sticky underside |
產品介紹
產品介紹:
Experimental Workflow/實驗步驟
1.Sample Preparation—加熱培養插入元件
2.Microscopy/顯微觀察
3.Image Analysis /顯微分析
4.Quantitative and Statistical Analysis/定量和統計分析
1. Sample Preparation—加熱培養插入元件
當放入細胞培養表面,ibidi-Culture-Insert提供兩個中間有500um的間隙的獨立培養室。細胞在兩個培養室生長,之后將這個硅膠元件從表面移除。移除后,由于中間的隔斷壁,在培養表面形成規則的細胞補丁,兩塊補丁中間有非常規則,寬度***致的縫隙。
由于這個獨特的設計,ibidi-Culture-Inser自身粘附在培養表面,這樣的設計完全避免了細胞在隔斷壁下生長。從表面移除后,這個細胞間隙(也就是傷口)會沒有任何污染和改變,且培養表面的包被也不會被破壞。通過這個方法,***個沒有任何細胞覆蓋且非常規則的區域。
2.Microscopy/顯微觀察
3.Image Analysis /顯微分析
4.Quantitative and Statistical Analysis/定量和統計分析
Data Acquisition/數據采集:
顯微鏡用于評估傷口愈合的過程。根據你的關注點和興趣,不僅可以視頻顯微鏡,還可以進行定點的成像觀察。ibidi加熱與孵育系統可以直接在培養的條件下進行活細胞成像,不用將樣品反復的從孵育室移至顯微鏡上。
ibidi的傷口愈合成像分析解決方案可以評估2D細胞遷移,并緊緊通過4步就可以得到結果。
網頁自動分析軟件--WimScratch軟件可以將您手機的數據在幾分鐘內自動生成結果,你只需上傳數據到圖像分析平臺,結果將通過電子郵件即時發送給您。
分析數據包括:
a) 細胞覆蓋面積
b) 終止速度(平均≥5個圖像)
c) 加速特征(平均≥5個圖像)
d) 概覽圖
e) 中間接合處的近似值(平均≥5個圖像)
Wound Healing Image Analysis/傷口成像分析– WimScratch
是***個傷口愈合和細胞遷移實驗的成像分析軟件
1. 全面解決傷口愈合實驗-從樣品準備到成像分析只需要幾步
2. 客觀的和可再生分析
3. 簡單并且快速的數據處理-幾分鐘出結果
4. 不需要額外的硬件或者軟件
相關產品
|
|
|
|
| |
Ibidi加熱孵育系統1通用型 | μ-Dish 35mm, low | μ-Dish 35mm, high | micro-Insert 4 well Family | Wound Healing Image Analysis - WimScratch | ibidi趨化性試驗 u-Slide Chemotaxis |